ke6: Check Voltage of VPWR Circuit
| Steps | _Key On, engine Off
_ISC solenoid disconnected _DVOM on 20 volt scale _Measure voltage between VPWR at the ISC solenoid harness connector and battery ground |
| Result | Is voltage less than 10.5 volts? |
| Direction | YES
Service open circuit. Rerun Quick Test NO GO to Continue |
| Component | Idle Speed Controller/Idle Bypass Valve |
| Description | The
ISC is used to control engine idle speed and is controlled by the EEC.
The ISC allows the EEC to control the engine RPM by allowing intake air
flow around the throttle plate.
The ISC has the following functions: Cold engine fast idle No accelerator pedal effort required during engine cranking Dashpot function to help prevent engine stalling upon de-accleration Over temperature idle boost Engine idle load correction |
| Location | Mounted onto the throttle body. Cylinder shape device. |
| Wire Colors | Red
Grey with White stripe |
| Image |  |