h1: Check Fuel Pressure
| Steps | _Key Off, wait 10 seconds
_Install fuel pressure gauge _Verify that manifold vacuum is connected to the fuel pressure regulator if applicable _Start engine and run at idle _Refer to Fuel Pressure Specification table For NO start condition: If engine will not run, cycle Key Off to On several times. Refer to Fuel Pressure Specification table Is fuel pressure within specification for the engine being tested? |
| Result | Is fuel pressure within specification for the engine being tested? |
| Direction | YES
GO to Continue NO Remove fuel pressure gauge. Refer to the Shop Manual, Group 24 for electric fuel pump and/or Section 11 in this manual for fuel pressure regulator check |