fd3: Check BOO Circuit for Short to Ground
| Steps | _Key Off
_Breakout box installed _Processor disconnected _DVOM on 200,000 ohm scale _Disconnect BOO circuit from 14290 harness (12 pin connector) _Measure resistance between Test Pin 2 and Test Pin 40 at the breakout box |
| Result | Is resistance greater than 10,000 ohms? |
| Direction | YES
GO to Continue NO Remove breakout box. Service short circuit. Rerun Engine Running Self-Test |
| Component | |
| Description | |
| Location | |
| Wire Colors | |