dk23: Check VAF Signal for Short to Ground
| Steps | _Key OFF, wait 10 seconds
_Processor disconnected _Harness disconnected from Vane Meter _DVOM on 200,000 ohm scale _Measure resistance at the Vane Meter vehicle harness between VAF SIGNAL and SIGNAL RETURN and between VAF SIGNAL and negative battery terminal. |
| Result | Are both resistances greater than 10,000 ohms? |
| Direction | YES
Replace processor. Remove breakout box. Reconnect processor and Vane Meter. Rerun Quick Test NO Service circuit shorts. Reconnect vane meter. Rerun Quick Test |