Steps | _Remain in Key On Engine Off Continuous Monitor mode
_Observe VOM or STAR LED for a fault indication while performing the following: _Referring to the illustration, grasp the harness closest to the sensor connector. Wiggle, shake or bend a small section of the EEC-IV system harness while working your way to the dash panel. Also wiggle, shake or bend the EEC-IV harness from the dash panel to the processor |
Result | Is a fault indicated? |
Direction | YES
Isolate fault and service as necessary. Clear Continuous Memory Code. Refer to Appendix in Section 16. Rerun Quick Test. NO GO to Continue |