| [Turbo Coupe Technical Articles] | [Turbo Coupe Registry] | [Turbo Coupe Literature] | [Contact] |
|
|
||||
|
| Steps | _Turn ignition switch Off
_Disconnect 32-pin plug from electronic controller _Connect EEC-IV Breakout box with Tool T83L-50-EEC-IV or equivalent, Anti-Lock Test Adapter T87P-50-ALA or equivalent, to the anti-lock 32-pin plug wiring harness. _Measure resistance between Breakout box Pins 5 and 22 |
| Result | 800 to 1400 ohms (0.8 to 1.4K ohms): GO to Step Continue Any other reading: GO to Step Continue |